The floor laid, plus bits
Right, the floor is laid. I decided to leave the 2" gap created by a cock-up in measuring at the back: when all is done, that'll be the least important place and anyway, with the edge-strip over the carpet, it won't matter. Honest.
Moving on, I've stripped some of the wall panels prior to putting up the sheet ply walls. More to strip, before deciding where to fix battens to hold everything up. I've also bought most of the leisure circuit - 110Ah deep cycle battery, fuses, wire, etc - and measured up for the bench seats, which will be boxes 350mm tall and 400mm deep running the length of the back section.
Next: more bits for the leisure circuit, and design thoughts about those benches.
Moving on, I've stripped some of the wall panels prior to putting up the sheet ply walls. More to strip, before deciding where to fix battens to hold everything up. I've also bought most of the leisure circuit - 110Ah deep cycle battery, fuses, wire, etc - and measured up for the bench seats, which will be boxes 350mm tall and 400mm deep running the length of the back section.
Next: more bits for the leisure circuit, and design thoughts about those benches.
0 Comments:
Post a Comment
<< Home